SDS

A listing of SDS's
SAFETY DATA SHEET
Durcupan ACM epoxy, component D
1. IDENTIFICATION
Product Identifiers
Product Name:
Durcupan ACM epoxy, component D
Other Names:
N/A
Product Number(s):
EMS14040-D
CAS Number:
84-74-2 dibutyl phthalate
Recommended use of the chemical and restriction on use
Laboratory use
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS08 Health hazard
Repr. 1B H360 May damage fertility or the unborn child.
Label Elements
Signal Words
Danger
Hazard Statement(s)
May damage fertility or the unborn child
Precautionary Statement(s)
Wear protective gloves/protective clothing/eye protection/face protection.
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
IF exposed or concerned: Get medical advice/attention.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations
Primary route(s) of entry
No further relevant information is available
Human Health
Inhalation:
No further relevant information is available
Ingestion:
No further relevant information is available
Eyes:
No further relevant information is available
Skin:
No further relevant information is available
Environment
Do not allow to enter sewers/ surface or ground water.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
dibutyl phthalate
87-74-2
N/A
Not Available
4. FIRST AID MEASURES
Ingestion
If symptoms persist consult doctor.
Inhalation
Supply fresh air; consult doctor in case of complaints
Skin Contact
Generally the product does not irritate the skin
Eye Contact
Rinse opened eye for several minutes under running water.
Other Information
No further relevant information is available
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Use fire fighting measures that suit the environment.
HAZCHEM
No further relevant information is available
Special protective equipment and precautions for fire fighters
No further relevant information is available
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
No further relevant information is available
Environmental precautions
: Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
7. HANDLING AND STORAGE
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Conditions for safe storage
No further relevant information is available
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
84-74-2 dibutyl phthalate
-
-
-
5 mg/m³
Engineering controls
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Personal protective equipment
Eye and face protection
Tightly fitted goggles
Skin protection
Protective gloves
Body protection
No further relevant information is available
Respiratory protection
In cases of brief exposure or low pollution, use a respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Colourless liquid
Odour
Characteristic
pH
Not determined
Vapour Pressure
Vapor pressure at 162 °C (324 °F): 0.00002 hPa
Density
Density at 20 °C (68 °F): 1.045 g/cm³ (8.721 lbs/gal)
Boiling Point
340 °C (644 °F)
Melting Point
-35.8 °C (-32 °F)
Solubility
Solubility in / Miscibility with
Water at 20 °C (68 °F): 0.1 g/l
Specific Gravity of Density
Density at 20 °C (68 °F): 1.045 g/cm³ (8.721 lbs/gal)
Flash Point
188 °C (370 °F)
Flammable (Explosive) Limits
Not flammable. Product does not present an explosion hazard
· Explosion limits:
Lower: <0.1 Vol %
Upper: 1.97 Vol %
Ignition Temperature
Not determined.
Formula
Not determined.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information is available
Chemical stability
No further relevant information is available
Possibility of hazardous reactions
No further relevant information is available
Conditions to avoid
No further relevant information is available
Incompatible materials
No further relevant information is available
11. TOXICOLOGICAL INFORMATION
Acute effects
84-74-2 dibutyl phthalate
Oral LD50 8000 mg/kg (rat)
Dermal LD50 20000 mg/kg (rabbit)
Eye contact
No irritating effect
Skin contact
No irritating effect
Ingestion
No further relevant information is available
Inhalation
No further relevant information is available
Toxicity and irritation
No further relevant information is available
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information is available
Persistence and degradability
No further relevant information is available
Bioaccumulative potential
No further relevant information is available
Other adverse effects
No further relevant information is available
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed of with household garbage. Do not allow the product to reach the sewage system. Disposal must be made according to official regulations.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
No further relevant information is available

UN Number
UN3082
Proper shipping name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (dibutyl phthalate)
Transport hazard class
Class 9
Packing group
III
Environmental hazard
Yes
Symbol (fish and tree)
Special precautions for users
Warning: Miscellaneous dangerous substances and articles
Additional information
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 1000 mL

Limited quantities (LQ) 5L
· Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 1000 mL
15. REGULATORY INFORMATION
Poisons Schedule Number
Carcinogenic - 84-74-2 dibutyl phthalate D
Other Information
No further relevant information is available
16. OTHER INFORMATION
SDS preparation date
23 October 2023
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...