SAFETY DATA SHEET
Durcupan ACM Epoxy - Component A
1. IDENTIFICATION
Product Identifiers
Product Name:
Durcupan ACM Epoxy - Component A
Other Names:
Durcupan ACM epoxy
Product Number(s):
EMS14041
CAS Number:
25068-38-6
Recommended use of the chemical and restriction on use
Laboratory use
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS07
Skin Irrit. 2 H315 Causes skin irritation
Eye Irrit. 2 H319 Causes serious eye irritation
Skin Sens. 1 H317 May cause an allergic skin reaction
Label Elements
Signal Words
Warning
Hazard Statement(s)
Causes skin irritation
Causes serious eye irritation
May cause an allergic skin reaction
Precautionary Statement(s)
Avoid breathing dust/fume/gas/mist/vapours/spray
Wear protective gloves/protective clothing/eye protection/face protection
Avoid release to the environment
Wash thoroughly after handling
Contaminated work clothing must not be allowed out of the workplace
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do
Continue rinsing
Specific treatment (see on this label)
Take off contaminated clothing and wash before reuse
If skin irritation or rash occurs: Get medical advice/attention
If eye irritation persists: Get medical advice/attention
If on skin: Wash with plenty of water
Collect spillage
Store in a well-ventilated place. Keep cool
Store in a dry place. Store in a closed container
Dispose of contents/container in accordance with local/regional/national/international regulations
Primary route(s) of entry
No further relevant information is available
Human Health
Inhalation:
No further relevant information is available
Ingestion:
No further relevant information is available
Eyes:
Causes serious eye irritation
Skin:
Causes skin irritation
Environment
Do not allow to enter sewers/ surface or ground water
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
bisphenol-A-(epichlorhydrin) epoxy resin
25068-38-6
-
Not Available
4. FIRST AID MEASURES
Ingestion
If symptoms persist, consult doctor
Inhalation
Supply fresh air and to be sure, call for a doctor
Skin Contact
Immediately wash with water and soap and rinse thoroughly
Eye Contact
Rinse the opened eye for several minutes under running water. If symptoms persist, consult a doctor
Other Information
No further relevant information is available
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Use fire fighting measures that suit the environment
HAZCHEM
No further relevant information is available
Special protective equipment and precautions for fire fighters
No further relevant information is available
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
No further relevant information is available
Environmental precautions
: Do not allow water to enter sewers/surface or ground water
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Ensure adequate ventilation
7. HANDLING AND STORAGE
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols
Conditions for safe storage
Keep the receptacle tightly sealed
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Engineering controls
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work
Personal protective equipment
Eye and face protection
Tightly sealed goggles
Skin protection
Protective gloves.
Body protection
Protective gloves.
Tightly sealed goggles
Respiratory protection
In cases of brief exposure or low pollution, use a respiratory filter device. In case of intensive or longer exposure, use respiratory protective device that is independent of circulating air
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Light Yellow
Odour
Undistinguishable
pH
Not determined
Vapour Pressure
Not determined
Density
Density at 20 °C (68 °F): 1.14 g/cm² (9.513 lbs/gal)
Boiling Point
Not determined
Melting Point
Not determined
Solubility
Not miscible or difficult to mix
Specific Gravity of Density
Not determined
Flash Point
Not determined
Flammable (Explosive) Limits
Not flammable
The product does not present an explosion hazard.
Ignition Temperature
Not determined
Formula
No further relevant information is available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information is available.
Chemical stability
No further relevant information is available.
Possibility of hazardous reactions
No dangerous decomposition products known
Conditions to avoid
No further relevant information is available.
Incompatible materials
No further relevant information is available.
11. TOXICOLOGICAL INFORMATION
Acute effects
No further relevant information is available.
Eye contact
Irritating effect
Skin contact
Irritant to skin and mucous membranes
Sensitization possible through skin contact
Ingestion
No further relevant information is available.
Inhalation
No further relevant information is available.
Toxicity and irritation
No further relevant information is available.
12. ECOLOGICAL INFORMATION
Ecotoxicity
Water hazard class 2 (Assessment by list): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground
Persistence and degradability
No further relevant information is available
Bioaccumulative potential
No further relevant information is available
Other adverse effects
No further relevant information is available
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed of with household garbage. Do not allow the product to reach the sewage system.
Disposal must be made according to official regulations

Water hazard class 2 (Assessment by list): hazardous for water
Do not allow the product to reach groundwater, a watercourse, or the sewage system.
Danger to drinking water if even small quantities leak into the ground
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
No further relevant information is available

UN Number
UN3082
Proper shipping name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Transport hazard class
Class 9
Packing group
III
Environmental hazard
Yes - Symbol (fish and tree)
Special precautions for users
Warning: Miscellaneous dangerous substances and articles
· Danger code (Kemler): 90
· EMS Number: F-A,S-F
Additional information
Transport/Additional information:
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner package: 30 mL
Maximum net quantity per outer package: 1000 mL

Limited quantities (LQ): 5L

UN "Model Regulation": UN3082, Environmentally hazardous substances, liquid, n.o.s.
(reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700)), 9, III
15. REGULATORY INFORMATION
Poisons Schedule Number
Substance is not listed
Other Information
Hazard statements
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
· Precautionary statements
Avoid breathing dust/fume/gas/mist/vapours/spray
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Wash thoroughly after handling.
Contaminated work clothing must not be allowed out of the workplace.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Specific treatment (see on this label).
Take off contaminated clothing and wash before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
If on skin: Wash with plenty of water.
Collect spillage.
Store in a well-ventilated place. Keep cool.
Store in a dry place. Store in a closed container.
Dispose of contents/container in accordance with local/regional/national/international regulations.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16. OTHER INFORMATION
SDS preparation date
28 November 2024
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...