SAFETY DATA SHEET
3M™ Novec™ Contact Cleaner
1. IDENTIFICATION
Product Identifiers
Product Name:
3M Novec Contact Cleaner
Other Names:
N/A
Product Number(s):
M051
CAS Number:
-
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Gas Under Pressure: Liquefied gas.
Label Elements
Signal Words
Warning
Hazard Statement(s)
Contains gas under pressure; may explode if heated.
Precautionary Statement(s)
Protect from sunlight. Store in a well-ventilated place. Dispose of contents/container in accordance with applicable regulations.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Intentional misuse by deliberately concentrating and inhaling contents can be harmful or fatal.
Ingestion:
Not available.
Eyes:
Not available.
Skin:
Not available.
Environment
Not available.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Methyl Nonafluoroisobutyl Ether
163702-08-7
50 - 70
-
Methyl Nonafluorobutyl Ether
163702-07-6
9.7-43.65
-
Carbon Dioxide
124-38-9
1 - 5
-
4. FIRST AID MEASURES
Ingestion
No need for first aid is anticipated.
Inhalation
No need for first aid is anticipated.
Skin Contact
No need for first aid is anticipated.
Eye Contact
No need for first aid is anticipated.
Other Information
See Section 11.1. Information on toxicological effects.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Material will not burn. Use a fire fighting agent suitable for the surrounding fire.
HAZCHEM
Closed containers exposed to heat from fire may build pressure and explode. Exposure to extreme heat can give rise to thermal decomposition.
Special protective equipment and precautions for fire fighters
When fire fighting conditions are severe and total thermal decomposition of the product is possible, wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants,bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ventilate the area with fresh air.
For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with
good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards,
respiratory protection, ventilation, and personal protective equipment.
Environmental precautions
Avoid release to the environment.
Methods and materials for containment and clean up
If possible, seal leaking container. Place leaking containers in a well-ventilated area, preferably an operating exhaust hood, or if necessary outdoors on an impermeable surface until appropriate packaging for the leaking container or its contents is available. Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorised person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations.
7. HANDLING AND STORAGE
Precautions for safe handling
Do not breathe thermal decomposition products. Avoid skin contact with hot material. For industrial or professional use only. Store work clothes separately from other clothing, food and tobacco products. Do not pierce or burn, even after use. No smoking: Smoking while using this product can result in contamination of the tobacco and/or smoke and lead to the formation of hazardous decomposition products.
Conditions for safe storage
Protect from sunlight. Do not expose to temperatures exceeding 50C/122F. Protect from sunlight. Store in a well ventilated place. Store away from strong bases.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
Carbon Dioxide
5000 ppm
9000
30000
-
Methyl Nonafluorobutyl Ether
750 ppm
-
-
-
Methyl Nonafluoroisobutyl Ether
750 ppm
-
-
-
-
-
-
-
-
Engineering controls
Provide appropriate local exhaust when product is heated. For those situations where the material might be exposed to extreme overheating due to misuse or equipment failure, use with appropriate local exhaust ventilation sufficient to maintain levels of thermal decomposition products below their exposure guidelines. Do not remain in area where available oxygen may be reduced. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment.
Personal protective equipment
Eye and face protection
Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended:
Full Face Shield
Indirect Vented Goggles
Skin protection
No chemical protective gloves are required.
Body protection
Wear heat insulating gloves when handling hot material to prevent thermal burns.
Respiratory protection
During heating:
Use a positive pressure supplied-air respirator if there is a potential for over exposure from an uncontrolled release, exposure levels are not known, or under any other circumstances where air-purifying respirators may not provide adequate protection.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Liquid/Aerosol
Odour
Clear, Colourless, Liquid with Slight Ethereal Odor, Contents Under Pressure.
pH
Not Applicable.
Vapour Pressure
200 mmHg [@ 25 °C] [Details:Internal Pressure for Aerosol Can
is approximately 75 psig @25C].
Density
1.52 g/ml
Boiling Point
61 °C
Melting Point
Not Applicable.
Solubility
In Water < 12 ppm
Specific Gravity of Density
Not available.
Flash Point
No flash point.
Flammable (Explosive) Limits
No Data Available
Ignition Temperature
405 °C [Details:per ASTM E659-84 method]
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
Chemical stability
No further relevant information available.
Possibility of hazardous reactions
Hazardous polymerisation will not occur.
If the product is exposed to extreme condition of heat from misuse or equipment failure, toxic decomposition products that include hydrogen fluoride and perfluoroisobutylene can occur.
Conditions to avoid
Perfluoroisobutylene (PFIB) at Elevated Temperatures - extreme condition of heat.
Incompatible materials
Hazardous polymerisation will not occur
11. TOXICOLOGICAL INFORMATION
Acute effects
No further relevant information available.
Eye contact
Methyl Nonafluoroisobutyl Ether Rabbit No significant irritation
Methyl Nonafluorobutyl Ether Rabbit No significant irritation
Skin contact
Name Species Value
Methyl Nonafluoroisobutyl Ether Rabbit No significant irritation
Methyl Nonafluorobutyl Ether Rabbit No significant irritation
Ingestion
No further relevant information available.
Inhalation
For the component/components, either no data are currently available or the data are not sufficient for classification.
Toxicity and irritation
Name Route Species Value
Overall product Ingestion No data available; calculated ATE >5,000 mg/kg
Methyl Nonafluoroisobutyl Ether Dermal LD50 estimated to be > 5,000 mg/kg
Methyl Nonafluoroisobutyl Ether Inhalation Vapor (4 hours) Rat LC50 > 1,000 mg/l
Methyl Nonafluoroisobutyl Ether Ingestion Rat LD50 > 5,000 mg/kg
Methyl Nonafluorobutyl Ether Dermal LD50 estimated to be > 5,000 mg/kg
Methyl Nonafluorobutyl Ether Inhalation Vapor (4 hours) Rat LC50 > 1,000 mg/l
Methyl Nonafluorobutyl Ether Ingestion Rat LD50 > 5,000 mg/kg
Carbon Dioxide Inhalation Gas (4 hours) Rat LC50 > 53,000 ppm
ATE = acute toxicity estimate
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material
and/or its components.
13. DISPOSAL CONSIDERATIONS
General information
Dispose of contents/ container in accordance with the local/regional/national/international regulations.Prior to disposal, consult all applicable authorities and regulations to insure proper classification. Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Properdestruction may require the use of additional fuel during incineration processes. Facility must be capable of handling aerosol
cans. Combustion products will include halogen acid (HCl/HF/HBr). Facility must be capable of handling halogenated
materials. Empty and clean product containers may be disposed as non-hazardous waste. Consult your specific regulations and service providers to determine available options and requirements.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Closed containers exposed to heat from fire may build pressure and explode. Exposure to extreme heat can give rise to thermal decomposition.

UN Number
None
Proper shipping name
Not regulated.
Transport hazard class
Void
Packing group
None.
Environmental hazard
No information available.
Special precautions for users
No information available.
Additional information
No information available.
15. REGULATORY INFORMATION
Poisons Schedule Number
Not listed.
Other Information
EPCRA 311/312 Hazard Classifications:
Physical Hazards
Gas under pressure
Health Hazards

Not applicable
15.2. State Regulations
Contact 3M for more information.
16. OTHER INFORMATION
SDS preparation date
28 November 2024
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...