SAFETY DATA SHEET
Schiff's Aqueous Stain
1. IDENTIFICATION
Product Identifiers
Product Name:
Schiff's Aqueous Stain
Other Names:
Reagent for periodic acid schiff reaction, Schiff's Reagent
Product Number(s):
ASCHF-100
CAS Number:
-
Recommended use of the chemical and restriction on use
Laboratory use.
Used in hospital and pathology laboratories only.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
No information available.
Label Elements
Signal Words
Warning
Hazard Statement(s)
Serious Eye Damage/Irritation 1,H318;
Acute Toxicity (Oral) 4, H302
Carcinogenicity 2, H351;
Acute Toxicity (Oral) 4, H302
Acute Toxicity (Inhalation) 3, H331;
Skin Corrosion/Irritation 1B, H314;
STOT SE3, H335.
Precautionary Statement(s)
Not available.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
May cause respiratory irritation leading to headache, dizziness and confusion,
Ingestion:
May cause irritation of mouth, throat and stomach.
Eyes:
May cause eye irritation, stinging, tearing and blurred vision.
Skin:
May cause skin irritation, itchiness and redness.
Environment
Not available.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
sodium metabisulphite
7681-57-4
0.95%
-
( 4 - ( 4 - a m i n o p h e n y l ) ( 4 - i m i n o c y c l o h e x a - 2 , 5 - d i e n y l i d e n
632-99-5
0.9%
-
Hydrochloric acid
7647-01-0
0.8%
-
4. FIRST AID MEASURES
Ingestion
If swallowed, do not induce vomiting. Immediately rinse mouth with water. Give a glass of water. Never give anything by mouth to an unconscious person. Seek medical attention if symptoms persist.
Inhalation
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Seek medical attention if breathing problems develop.
Skin Contact
In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. Seek medical attention if symptoms persist.
Eye Contact
In case of eye contact, hold eyelids open and rinse with water for at least 15 minutes. Seek medical attention
if symptoms persist.
Other Information
No further relevant information available.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Use fire extinguishing methods suitable to surrounding conditions.
HAZCHEM
Hazardous combustion products include oxides of carbon.
Product is not flammable or combustible. Containers close to fire should be removed if safe to do so.
Smoke and oxides of carbon.
Special protective equipment and precautions for fire fighters
When fighting a major fire wear self-contained breathing apparatus and protective equipment.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear appropriate respiratory protection and protective clothing. Evacuate all non-essential personnel from affected area. Do not breathe vapours. Ensure adequate ventilation.
Environmental precautions
In the event of a major spill, prevent spillage from entering drains or water courses.
Methods and materials for containment and clean up
Stop leak if safe to do so and absorb spill with sand, earth, vermiculite or some other absorbent material.
Collect the spilled material and place into a suitable container for disposal. Material may be slippery when spilt. Wash residue to drain with plenty of water.
7. HANDLING AND STORAGE
Precautions for safe handling
Use of safe work practices are recommended to avoid eye or skin contact and inhalation of vapours. Use only outdoors or in a well-ventilated area.
Food, beverages and tobacco products should not be stored or consumed where this material is in use.
Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure.
Conditions for safe storage
Store in a cool, dry and well ventilated area out of direct sunlight. Keep in original container tightly closed when not in use. Protect from heat, sparks, open flames and other sources of ignition. Keep away from strong alkalies, acids and oxidising agents.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
Sodium metabisulphite
-
5 mg/m³
-
-
Hydrochloric acid
-
-
5 ppm
7.5 mg/m³
Engineering controls
Maintain air concentration below occupational exposure standards, providing adequate ventilation.
Personal protective equipment
Eye and face protection
Eye and face protectors for protection against splashing materials or liquids. See Australian/New Zealand Standard AS/NZS 1337 for more information.
Skin protection
PVC or rubber gloves. See Australian/New Zealand Standard AS/NZS 2161 for more information.
When selecting gloves for use against certain chemicals, the degradation resistance, permeation rate and permeation breakthrough time should be considered.
Occupational protective clothing (depending on conditions in which it has to be used, in particular as regards the period for which it is worn, which shall be determined on the basis of the seriousness of the risk, the frequency of exposure to the risk, the characteristics of the workstation of each worker and the performance of the protective clothing). See Australian/New Zealand Standard AS/NZS 4501 for more information.
Body protection
Not available.
Respiratory protection
When vapours approach the exposure standards then the use of a dustmask or half-face respirator with a P1filter is recommended.
When vapours exceed the exposure standards, the use of an positive pressure demand self-contained or airline breathing apparatus is recommended. Filter capacity and respirator type depends on exposure levels.
If entering spaces where the airborne concentration of a contaminant is unknown then the use of a selfcontained breathing apparatus (SCBA) with positive pressure air supply is recommended.
See Australian Standards AS/NZS 1715 and 1716 for more information.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Clear liquid.
Odour
Not available.
pH
Not available.
Vapour Pressure
23 hPa
Density
~1
Boiling Point
100 °C
Melting Point
0 °C
Solubility
Not applicable
Specific Gravity of Density
Not available.
Flash Point
Not applicable
Flammable (Explosive) Limits
Not applicable
Ignition Temperature
Not applicable
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
Stable at ambient temperature and under normal conditions of use.
Possibility of hazardous reactions
Hazardous polymerisation will not occur.
Conditions to avoid
No further relevant information available.
Incompatible materials
Strong alkalies, acids and oxidising agents.
11. TOXICOLOGICAL INFORMATION
Acute effects
No further relevant information available.
Eye contact
May cause eye irritation, stinging, tearing and blurred vision.
Skin contact
May cause skin irritation, itchiness and redness.
Ingestion
May cause irritation of mouth, throat and stomach.
Inhalation
May cause respiratory irritation leading to headache, dizziness and confusion.
Toxicity and irritation
LD??/LC?? Values Relevant for Classification:
7681-57-4 sodium metabisulphite
Oral LD?? >2000 mg/kg (rat)
Dermal LD?? >2000 mg/kg (rat)
7647-01-0 Hydrochloric acid
Oral LD?? 900 mg/kg (rabbit)
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
No further relevant information available.
13. DISPOSAL CONSIDERATIONS
General information
Dispose according to applicable local and state government regulations.
Special Precautions for Landfill or Incineration:
Please consult your state Land Waste Management Authority for more information
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Hazardous combustion products include oxides of carbon.
Product is not flammable or combustible. Containers close to fire should be removed if safe to do so.
Smoke and oxides of carbon.

UN Number
None
Proper shipping name
Not regulated.
Transport hazard class
Void
Packing group
None.
Environmental hazard
No information available.
Special precautions for users
No information available.
Additional information
No information available.
15. REGULATORY INFORMATION
Poisons Schedule Number
Schedule: 5
Other Information
7732-18-5 Water
7681-57-4 sodium metabisulphite
632-99-5 (4-(4-aminophenyl)(4-iminocyclohexa-2,5-dienylidene)methyl)-2-methylanilinehydrochloride,
Basic fuchsin; C.I. Basic Violet 14
7647-01-0 Hydrochloric acid.
16. OTHER INFORMATION
SDS preparation date
1 February 2018
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...