SDS

A listing of SDS's
SAFETY DATA SHEET
Alcian Blue
1. IDENTIFICATION
Product Identifiers
Product Name:
Alcian Blue
Other Names:
Ingrain Blue; Alcian Blue stain; Alcian blue 1% in 3% acetic acid.
Product Number(s):
AALCB-100
CAS Number:
-
Recommended use of the chemical and restriction on use
Laboratory use.
Used in hospital and pathology laboratories only.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
H226 Flam. Liq. 3
H314 Skin Corr. 1A,
Label Elements
Signal Words
Warning
Hazard Statement(s)
Not classified as Hazardous according to the Globally Harmonised System of Classification and Labelling of Chemicals (GHS) and Safe Work Australia criteria.
Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. (7th edition)
The product is not classified according to the Globally Harmonised System (GHS).
Precautionary Statement(s)
Not available.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
May cause respiratory irritation, coughing, discomfort, difficulty breathing and shortness of breath.
Ingestion:
May cause irritation of mouth, throat and stomach, mucous build up, stomach pain, nausea,vomiting and diarrhoea.
Eyes:
May cause eye irritation, stinging, tearing and blurred vision.
Skin:
May cause skin irritation, itchiness and redness.
Environment
Not available.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
acetic acid
64-19-7
3%
Flam. Liq. 3, H226; Skin Corr. 1A, H314
4. FIRST AID MEASURES
Ingestion
If swallowed, do not induce vomiting. Immediately rinse mouth with water. Give 3 to 4 glasses of water. Never give anything by mouth to an unconscious person. Seek immediate medical attention.
Inhalation
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention if breathing problems develop.
Skin Contact
In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. Seek medical attention if symptoms persist.
Eye Contact
In case of eye contact, hold eyelids open and rinse with water for at least 15 minutes. Seek medical attention if symptoms persist.
Other Information
No further relevant information available.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Use fire extinguishing methods suitable to surrounding conditions.
HAZCHEM
Not available.
Special protective equipment and precautions for fire fighters
Hazardous combustion products include oxides of carbon and smoke.
Product is not flammable or combustible. When fighting a major fire wear self-contained breathing apparatus and protective equipment.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear appropriate protective equipment. Evacuate all non-essential personnel from affected area. Do not breathe vapours. Ensure adequate ventilation.
Environmental precautions
In the event of a major spill, prevent spillage from entering drains or water courses.
Methods and materials for containment and clean up
Stop leak if safe to do so and absorb spill with sand, earth, vermiculite or some other absorbent material. Collect the spilled material and place into a suitable container for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Use of safe work practices are recommended to avoid eye or skin contact and inhalation of vapours. Food, beverages and tobacco products should not be stored or consumed where this material is in use.
Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure.
Conditions for safe storage
Store in a cool, dry and well ventilated area. Keep in original container tightly closed when not in use. Protect from heat. Keep away from strong oxidising agents, acids and alkalies.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
acetic acid
10 ppm
25 mg/m³,
15 ppm
37 mg/m³
Engineering controls
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapour below occupational exposure standards.
Personal protective equipment
Eye and face protection
Eye and face protectors for protection against splashing materials or liquids. See Australian/New Zealand Standard AS/NZS 1337 for more information.
Skin protection
PVC or natural rubber gloves. See Australian/New Zealand Standard AS/NZS 2161 for more information. When selecting gloves for use against certain chemicals, the degradation resistance, permeation rate and permeation breakthrough time should be considered.
.Occupational protective clothing (depending on conditions in which it has to be used, in particular as regards the period for which it is worn, which shall be determined on the basis of the seriousness of the risk, the frequency of exposure to the risk, the characteristics of the workstation of each worker and the performance of the protective clothing). See Australian/New Zealand Standard AS/NZS 4501 for more information.
Body protection
No information available.
Respiratory protection
Use approved vapour respirator under conditions where exposure to the substance is apparent (e.g. generation of high concentrations of mist or vapour, inadequate ventilation, development of respiratory tract irritation) and engineering controls are not feasible. See Australian Standards AS/NZS 1715 and 1716 for more information.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Bright blue liquid
Odour
Not available.
pH
Not available.
Vapour Pressure
at 20 °C: 23 hPa
Density
1 g/cm³
Boiling Point
100 °C
Melting Point
0 °C
Solubility
Soluble in water.
Specific Gravity of Density
Not available.
Flash Point
Not applicable.
Flammable (Explosive) Limits
Not applicable.
Ignition Temperature
Not applicable.
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
Stable at ambient temperature and under normal conditions of use.
Possibility of hazardous reactions
Hazardous polymerisation will not occur.
Conditions to avoid
Extreme temperatures.
Incompatible materials
Strong oxidising agents, acids and alkalies.
11. TOXICOLOGICAL INFORMATION
Acute effects
No information available.
Eye contact
May cause eye irritation, stinging, tearing and blurred vision.
Skin contact
May cause skin irritation, itchiness and redness.
Ingestion
May cause irritation of mouth, throat and stomach, mucous build up, stomach pain, nausea, vomiting and diarrhoea.
Inhalation
May cause respiratory irritation, coughing, discomfort, difficulty breathing and shortness of breath.
Toxicity and irritation
LD??/LC?? Values Relevant for Classification:
64-19-7 acetic acid
Oral LD?? 3310 mg/kg (rat)
Dermal LD?? 1060 mg/kg (rabbit)
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
No further relevant information available.
13. DISPOSAL CONSIDERATIONS
General information
Dispose according to applicable local and state government regulations.
Special Precautions for Landfill or Incineration: Please consult your state Land Waste Management Authority for more information.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Not available.

UN Number
None.
Proper shipping name
Not regulated.
Transport hazard class
Void
Packing group
None.
Environmental hazard
No
Special precautions for users
No information available.
Additional information
No information available.
15. REGULATORY INFORMATION
Poisons Schedule Number
Not Scheduled.
Other Information
No further relevant information available.
16. OTHER INFORMATION
SDS preparation date
5 October 2021
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...