SAFETY DATA SHEET
Lowicryl K11M Initiator C
1. IDENTIFICATION
Product Identifiers
Product Name:
Lowicryl K11M Initiator C
Other Names:
Lowicryl K11M Kit
Product Number(s):
C450_1
CAS Number:
3524-62-7
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS06 Skull and crossbones
Acute Tox. 3 H301 Toxic if swallowed.
GHS07
Acute Tox. 4 H332 Harmful if inhaled.
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation
Label Elements
Signal Words
Danger
Hazard Statement(s)
Toxic if swallowed.
Harmful if inhaled.
Causes skin irritation.
Causes serious eye irritation.
Precautionary Statement(s)
Avoid breathing dust/fume/gas/mist/vapours/spray.
Wear protective gloves. Wear eye protection / face protection.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Remove person to fresh air and keep comfortable for breathing. If skin irritation occurs: Get medical advice/attention.
Rinse mouth.
Ingestion:
Immediately call a POISON CENTER/doctor. Rinse mouth.
Eyes:
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
Skin:
Wash with plenty of water.
Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.
Environment
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Benzoin Methyl Ether
3524-62-7
-
-
4. FIRST AID MEASURES
Ingestion
Do not induce vomiting; Call for medical help immediately.
Inhalation
In case of irregular breathing or respiratory arrest provide artificial respiration. Supply fresh air; consult doctor in case of complaints. In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately remove any clothing soiled by the product. Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM
Not available.
Special protective equipment and precautions for fire fighters
No special measures required.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions
Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up
Dispose contaminated material as waste according to item 13.
7. HANDLING AND STORAGE
Precautions for safe handling
No special precautions are necessary if used correctly.
Conditions for safe storage
Store in a dry place. Store in a closed container.
Keep container tightly sealed.
Keep cool.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Engineering controls
Keep cool.
Personal protective equipment
Eye and face protection
Tightly sealed goggles.
Skin protection
Protection of hands.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves.
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material.
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Respiratory protection
Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Crystalline powder
Odour
Characteristic.
pH
Not applicable.
Vapour Pressure
Not applicable.
Density
Not determined.
Boiling Point
Not determined.
Melting Point
50 °C
Solubility
Insoluble in water solubility at 20 °C
Specific Gravity of Density
Not applicable
Flash Point
110 °C
Flammable (Explosive) Limits
Not determined.
Ignition Temperature
Not determined.
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous decomposition products known.
Conditions to avoid
No further relevant information available.
Incompatible materials
Reducing agents.
11. TOXICOLOGICAL INFORMATION
Acute effects
No further relevant information available.
Eye contact
Irritating effect.
Skin contact
Irritant to skin and mucous membranes.
Ingestion
No further relevant information available.
Inhalation
No sensitising effects known.
Toxicity and irritation
No further relevant information available.
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging
Recommendation: Disposal must be made according to official regulations.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Not available.

UN Number
UN3288
Proper shipping name
3288 TOXIC SOLID, INORGANIC, N.O.S (Benzoin Methyl Ether)
Transport hazard class
6.1 Toxic substances.
Packing group
III
Environmental hazard
No information available.
Special precautions for users
Warning: Toxic substances
Danger code (Kemler): 60
EMS Number: F-A,S-A
Stowage Category: A
Additional information
ADG
Limited quantities (LQ) 5 kg
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 g Maximum net quantity per outer packaging: 1000 g Transport category 2
Tunnel restriction code E
15. REGULATORY INFORMATION
Poisons Schedule Number
Substance is not listed.
Other Information
No further relevant information available.
16. OTHER INFORMATION
SDS preparation date
11 April 2023
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...