SAFETY DATA SHEET
Meltmount Quick-Stick Mounting Medium
1. IDENTIFICATION
Product Identifiers
Product Name:
Meltmount Quick-Stick Mounting Medium
Other Names:
Cargille MeltMount Code 53
Product Number(s):
I011-1139, I011-1539, I011-1582, I011-1605, I011-1662, I011-1680, I011-1704
CAS Number:
-
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
The substance is not classified as hazardous according to the Globally Harmonized System (GHS).
Label Elements
Signal Words
Warning
Hazard Statement(s)
Not regulated.
Precautionary Statement(s)
Not regulated.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Not available.
Ingestion:
Not available.
Eyes:
Not available.
Skin:
Not available.
Environment
No further relevant information available.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Trade Secret.
-
-
-
4. FIRST AID MEASURES
Ingestion
Rinse out mouth and then drink plenty of water.
Do not induce vomiting; immediately call for medical help.
Inhalation
Unlikely route of exposure.
Supply fresh air; consult doctor in case of complaints.
Skin Contact
Do not pull solidified product away from the skin.
Wash with soap and water.
If skin irritation is experienced, consult a doctor.
After contact with the molten product, cool rapidly with cold water. Seek medical treatment.
Eye Contact
Remove contact lenses if worn.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
Gastric or intestinal disorders when ingested.
Thermal burns.
If medical advice is needed, have product container or label at hand.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Gaseous extinguishing agents
Carbon dioxide
Foam
Fire-extinguishing powder
Dry sand
HAZCHEM
Not available.
Special protective equipment and precautions for fire fighters
Formation of toxic gases is possible during heating or in case of fire.·
For safety reasons unsuitable extinguishing agents.
Water. Wear self-contained respiratory protective device.
Wear fully protective suit.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation,
Environmental precautions
Environmental precautions.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Methods and materials for containment and clean up
Allow to solidify.
Pick up mechanically.
Dispose of the collected material according to regulations.
7. HANDLING AND STORAGE
Precautions for safe handling
Open and handle receptacle with care.
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Conditions for safe storage
Store in a cool location.
Keep containers tightly sealed.
Storage Temperatures : 39 - 158 ?F / 4 - 70 ?C.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Engineering controls
No relevant information available.
Personal protective equipment
Eye and face protection
Safety glasses.
Skin protection
Thermally-protective gloves.
The glove material has to be impermeable and resistant to the product/ the substance.
Body protection
Thermal protection must be provided when substance/product is heated.
Respiratory protection
Not required under normal conditions of use.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Light yellow soft solid
Odour
Characteristic
pH
Not determined.
Vapour Pressure
Not determined.
Density
1.05 (Water = 1)
Boiling Point
Not determined.
Melting Point
65 °C (149 °F)
Solubility
Miscibility with Water: Negligible
Specific Gravity of Density
Not determined.
Flash Point
>149 °C (>300 °F)
Flammable (Explosive) Limits
Not determined.
Ignition Temperature
Not determined.
Formula
Not available,
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
Stable under normal temperatures and pressures.
Possibility of hazardous reactions
Reacts with strong oxidising agents.
Reacts with strong alkali.
Toxic fumes may be released if heated above the decomposition point.
Under fire conditions only.
Carbon monoxide and carbon dioxide.
Conditions to avoid
Excessive heat.
Incompatible materials
Oxidizers.
11. TOXICOLOGICAL INFORMATION
Acute effects
No further relevant information available.
Eye contact
Based on available data, the classification criteria are not met.
Skin contact
Based on available data, the classification criteria are not met.
Ingestion
Based on available data, the classification criteria are not met.
Inhalation
Based on available data, the classification criteria are not met.
Toxicity and irritation
No further relevant information available.
12. ECOLOGICAL INFORMATION
Ecotoxicity
Due to mechanical actions of the product (e.g. agglutinations), damages may occur.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Avoid release to the environment.
13. DISPOSAL CONSIDERATIONS
General information
The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and nonhazardous waste.
Uncleaned packagings .
Recommendation: Disposal must be made according to official regulations.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Not available.

UN Number
None.
Proper shipping name
Not regulated.
Transport hazard class
Void
Packing group
None.
Environmental hazard
No.
Special precautions for users
Not applicable.
Additional information
Not applicable.
15. REGULATORY INFORMATION
Poisons Schedule Number
Substance is not listed.
Other Information
Substance is not listed.
16. OTHER INFORMATION
SDS preparation date
23 August 2017
Comments
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product. The information supplied is based on data available to us and is believed to be correct. However, no guarantee or warranty of any kind, expressed or implied, is made with respect to this information presented and Cargille Laboratories assumes no responsibility for the result of the use of this product. This information is furnished upon the condition that the persons responsible for its use shall make their own determination of the suitability of the material for their particular purpose. Please note that we consider the English version to be the authoritative version for compliance and regulatory purposes.
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...