SAFETY DATA SHEET
Accutase cell detachment solution
1. IDENTIFICATION
Product Identifiers
Product Name:
Accutase in DPBS, 0.5 mM EDTA Sterile filtered Cell Culture Tested
Other Names:
Accutase cell detachment solution
Product Number(s):
637945, 900000016208, CM16208, SCR005
CAS Number:
Not available.
Recommended use of the chemical and restriction on use
Biochemical research/analysis
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Not a hazardous substance or mixture.
Label Elements
Signal Words
None
Hazard Statement(s)
Not a hazardous substance or mixture.
Precautionary Statement(s)
Not a hazardous substance or mixture.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
No further relevant information available.
Ingestion:
No further relevant information available.
Eyes:
No further relevant information available.
Skin:
No further relevant information available.
Environment
No further relevant information available.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Accutase
Not Available
>= 0.1 - < 1 %
Not Available
4. FIRST AID MEASURES
Ingestion
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Inhalation
After inhalation: fresh air. Consult doctor if feeling unwell.
Skin Contact
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/shower. Consult a physician.
Eye Contact
After eye contact: rinse out with plenty of water. Remove contact lenses.
Other Information
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
For this substance/mixture no limitations of extinguishing agents are given.
HAZCHEM
Not combustible.
Ambient fire may liberate hazardous vapours.
Ambient fire may liberate hazardous vapours.
Special protective equipment and precautions for fire fighters
Prevent fire extinguishing water from contaminating surface water or the ground water system.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Do not breathe vapours, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Advice for the emergency responders: Protective equipment see section 8.
For personal protection see section 8.
Advice for the emergency responders: Protective equipment see section 8.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and clean up
Cover drains. Collect, bind and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb). Dispose of properly. Clean up the affected area.
7. HANDLING AND STORAGE
Precautions for safe handling
Observe label precautions.
Immediately change contaminated clothing. Apply preventative skin protection. Wash hands and face after working with substance.
Immediately change contaminated clothing. Apply preventative skin protection. Wash hands and face after working with substance.
Conditions for safe storage
Storage class (TRGS 510): 10: Combustible liquids.
Apart from the uses mentioned in section 1.3 no other specific uses are stipulated.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Engineering controls
Immediately change contaminated clothing. Apply preventative skin protection. Wash hands and face after working with substance.
Personal protective equipment
Eye and face protection
Safety glasses.
Skin protection
Protective gloves.
Full contact and splash contact.
Material: Nitrile rubber
Minimum layer thickness: 0.11mm
Break through time: 480 min
Material tested KCL 741 Dermatril L
Full contact and splash contact.
Material: Nitrile rubber
Minimum layer thickness: 0.11mm
Break through time: 480 min
Material tested KCL 741 Dermatril L
Body protection
Protective clothing.
Respiratory protection
Required when vapours/aerosols are generated.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Clear, colourless liquid
Odour
No data available.
pH
No data available.
Vapour Pressure
No data available.
Density
No data available.
Boiling Point
No data available.
Melting Point
No data available.
Solubility
Soluble at 20°C
Specific Gravity of Density
No data available.
Flash Point
Not applicable
Flammable (Explosive) Limits
No data available.
Ignition Temperature
No data available.
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No data available.
Chemical stability
The product is chemically stable under standard ambient conditions (room temperature).
Possibility of hazardous reactions
Violent reactions possible with:
The generally known reaction partners of water.
The generally known reaction partners of water.
Conditions to avoid
No information available.
Incompatible materials
No data available.
11. TOXICOLOGICAL INFORMATION
Acute effects
Oral: No data available
Inhalation: No data available
Dermal: No data available.
Inhalation: No data available
Dermal: No data available.
Eye contact
No data available.
Skin contact
No data available.
Ingestion
No data available.
Inhalation
No data available.
Toxicity and irritation
No data available.
12. ECOLOGICAL INFORMATION
Ecotoxicity
No data available.
Persistence and degradability
No data available.
Bioaccumulative potential
No data available.
Other adverse effects
No data available.
13. DISPOSAL CONSIDERATIONS
General information
Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Not combustible.
Ambient fire may liberate hazardous vapours.
Ambient fire may liberate hazardous vapours.
UN Number
Not dangerous goods
Proper shipping name
Not dangerous goods
Transport hazard class
Not dangerous goods
Packing group
Not dangerous goods
Environmental hazard
Not dangerous goods
Special precautions for users
Not dangerous goods
Additional information
Not classified as dangerous in the meaning of transport regulations.
15. REGULATORY INFORMATION
Poisons Schedule Number
No poison schedule number allocated.
Other Information
Not available.
16. OTHER INFORMATION
SDS preparation date
13 November 2023
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.