SAFETY DATA SHEET
Apiezon® K Oil
1. IDENTIFICATION
Product Identifiers
Product Name:
Apiezon® K Oil
Other Names:
Not available
Product Number(s):
M1-K-00500
CAS Number:
Not available
Recommended use of the chemical and restriction on use
Laboratory use. Vacuum sealing oil.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
This product is not classified as hazardous and this document has been compiled for information purposes.
Label Elements
Signal Words
None
Hazard Statement(s)
Not available
Precautionary Statement(s)
Traces of hydrogen sulphide may be liberated at high temperatures. Hydrogen sulphide may accumulate in confined spaces and is highly toxic if inhaled in sufficient concentrations. Contact with hot material can cause thermal burns.
Primary route(s) of entry
Not available
Human Health
Inhalation:
Not available
Ingestion:
Not available
Eyes:
Not available
Skin:
Not available
Environment
Not available
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Paraffin Oils
8012-95-1
>95%
Not Available
Residues (petroleum), vacuum
64741-56-6
<5%
Not Available
4. FIRST AID MEASURES
Ingestion
Do not induce vomiting, obtain medical attention.
Inhalation
If inhalation of mists, fumes or vapour causes irritation remove to fresh air. If casualty does not rapidly recover seek medical attention.
Skin Contact
Wash with soap and water
Eye Contact
Irrigate with copious amounts of water
Other Information
If exposed to hydrogen sulphide fumes the effects will depend on the airborne concentration - 0.02ppm odour threshold, smell of rotten eggs; 10ppm eye and respiratory tract irritation.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Carbon dioxide, dry powder, foam or water fog. Do not use water jets
HAZCHEM
Combustion products include carbon monoxide.
Special protective equipment and precautions for fire fighters
Provide protective equipment including breathing apparatus must be worn when approaching a fire in a confined space.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Spilt product constitutes a slip hazard. Avoid contact with eyes.
Environmental precautions
Prevent entry into drains, sewers and watercourses.
Methods and materials for containment and clean up
Can be wiped from surfaces and residues cleaned with water and detergent.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with hot material to prevent burns
Conditions for safe storage
No special precautions required.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
Hydrogen sulphide
5ppm
7mg/m3
10ppm
14mg/m3
Engineering controls
At ambient temperature oil has very low volatility, so development of fumes is highly unlikely. At high temperatures hydrogen sulphide may be released.
Personal protective equipment
Eye and face protection
Eye washes should be available for emergency use.
Skin protection
Wash hands after use. For prolonged or repeated skin contact gloves are recommended.
Body protection
Wear coveralls.
Respiratory protection
None required
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Brown/black high viscosity liquid
Odour
Pungent
pH
Not applicable
Vapour Pressure
1 x 10-9 Torr at 20°C
Density
0.94 at 20°C
Boiling Point
>320°C
Melting Point
Not available
Solubility
Insoluble
Specific Gravity of Density
Not available
Flash Point
>350°C (open cup)
Flammable (Explosive) Limits
Data not available
Ignition Temperature
>400°C.
Formula
Not available
10. STABILITY AND REACTIVITY
Reactivity
Stable under normal conditions of use.
Chemical stability
Stable under normal conditions of use.
Possibility of hazardous reactions
Data not available.
Conditions to avoid
Temperatures >200°C.
Incompatible materials
Strong oxidising agents.
11. TOXICOLOGICAL INFORMATION
Acute effects
Skin and eyes are the most likely routes for exposure. Inhalation of vapours at high temperatures is possible. Accidental ingestion may occur.
Eye contact
May cause transient irritation.
Skin contact
Repeated and prolonged skin contact may cause dry skin or irritation.
Ingestion
Not available
Inhalation
Low toxicity by inhalation. Avoid vapours from heated materials which may cause irritation.
Toxicity and irritation
Not considered a mutagenic hazard or carcinogen.
12. ECOLOGICAL INFORMATION
Ecotoxicity
Expected to be practically non-toxic.
Persistence and degradability
Not regarded as inherently biodegradable.
Bioaccumulative potential
Has the potential to bioaccumulate.
Other adverse effects
No other adverse effects envisaged.
13. DISPOSAL CONSIDERATIONS
General information
Product and packaging must be disposed of in accordance with local and national regulations. May be incinerated.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Combustion products include carbon monoxide.

UN Number
Not relevant
Proper shipping name
Not relevant
Transport hazard class
Not relevant
Packing group
Not relevant
Environmental hazard
Not relevant
Special precautions for users
Not relevant
Additional information
Not relevant
15. REGULATORY INFORMATION
Poisons Schedule Number
Product is not subject to Authorisation under REACH.
Other Information
A chemical safety assessment has been performed for this substance.
16. OTHER INFORMATION
SDS preparation date
29 November 2022
Comments
Compiled in accordance with Regulation (EC) No 1907/2006 Annex II, as amended by regulation (EU) 2015/830, and OSHA hazard communication guidelines.
References
The information provided in this Safety Data Sheet is correct to our best knowledge, information and belief at the date of its
publication. It is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not
be construed as guaranteeing any specific property of the product
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...