SAFETY DATA SHEET
Aqueous Conductive Silver Liquid, SEM adhesive
1. IDENTIFICATION
Product Identifiers
Product Name:
Aqueous Conductive Silver Liquid, SEM adhesive
Other Names:
Conductive water-based glue.
Product Number(s):
I005, I0051
CAS Number:
-
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Conductive, water based glue especially for SEM specimens - slow drying.
Label Elements
Signal Words
Warning
Hazard Statement(s)
Hazardous according to criteria of Hazardous Substances Information System [HSIS Worksafe Australia].
Precautionary Statement(s)
Keep away from sources of ignition - No smoking.
When using, do not eat, drink or smoke.
Do not breathe fumes.
Avoid contact with eyes.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do not empty into drains.
Take precautionary measures against static discharges.
This material and its container must be disposed of in a safe way.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
When using, do not eat, drink or smoke.
Do not breathe fumes.
Avoid contact with eyes.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do not empty into drains.
Take precautionary measures against static discharges.
This material and its container must be disposed of in a safe way.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Not available.
Ingestion:
Not available.
Eyes:
Not available.
Skin:
Not available.
Environment
Not available.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Modified polyvinyl acetate
-
30-60%
-
Water
7732-18-5
30-60%
-
Dipropylene glycol monobutyl ether
29911-28-2
1-<10%
-
Vinyl acetate
108-05-4
<0.1%
R11
Formaldehyde
50-00-0
<0.1%
R23/24/25, R34, R40,
R41, R43
Silver
7440-22-4
<56.0%
-
4. FIRST AID MEASURES
Ingestion
Rinse mouth with water. If swallowed, give a glass of water to drink. If vomiting occurs give further water. Seek medical advice.
Inhalation
Remove victim from area of exposure - avoid becoming a casualty. Seek medical advice if effects persist.
Skin Contact
If skin contact occurs, remove contaminated clothing and wash skin with running water. If irritation occurs seek medical advice.
Eye Contact
If in eyes, wash out immediately with water. In all cases of eye contamination it is a sensible precaution to seek medical advice.
Other Information
Treat symptomatically.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Not combustible, however, if material is involved in a fire use: Fine water spray, normal foam, dry agent (carbon dioxide, dry chemical powder).
HAZCHEM
Not combustible, however following evaporation of the water component of the material, the residual material can burn if ignited. On burning will emit toxic fumes, including those of oxides of carbon.
Special protective equipment and precautions for fire fighters
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eye contact.
Environmental precautions
If contamination of sewers or waterways has occurred advise local emergency services.
Methods and materials for containment and clean up
SMALL SPILLS: Wipe up with absorbent (clean rag or paper towels). Allow absorbent to dry before disposing with normal household garbage.
LARGE SPILLS: Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eye contact. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert material).
Collect and seal in properly labelled containers or drums for disposal. Wash area down with excess water.
LARGE SPILLS: Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eye contact. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert material).
Collect and seal in properly labelled containers or drums for disposal. Wash area down with excess water.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid eye contact and repeated or prolonged skin contact.
Conditions for safe storage
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
Formaldehyde
1 ppm
1.2 mg/m3
2.5 mg/m3
2 ppm
Vinyl acetate
10ppm
35 mg/m3
70 mg/m3
20ppm
Silver
-
0.1mg/m
-
-
Engineering controls
Ensure ventilation is adequate and that air concentrations of components are controlled below quoted Exposure Standards.
Use in well ventilated areas. Keep containers closed when not in use.
Use in well ventilated areas. Keep containers closed when not in use.
Personal protective equipment
Eye and face protection
Safety glasses.
Skin protection
Impervious gloves.
Body protection
Wash contaminated clothing and other protective equipment before storage or re-use.
Always wash hands before smoking, eating, drinking or
using the toilet.
Always wash hands before smoking, eating, drinking or
using the toilet.
Respiratory protection
If risk of inhalation exists, wear organic vapour respirator meeting the requirements of AS/NZS 1715 and AS/NZS 1716.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Liquid, Milky with a white lustrous metal sheen.
Odour
Mild.
pH
2.2-3.5
Vapour Pressure
3kPa (20°C
Density
Not determined.
Boiling Point
100 °C (water
Melting Point
Not applicable.
Solubility
Incomplete
Specific Gravity of Density
Not available.
Flash Point
Not available.
Flammable (Explosive) Limits
Not available.
Ignition Temperature
Not available.
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
Stable under normal conditions of use.
Possibility of hazardous reactions
Hazardous polymerisation will not occur.
Oxides of carbon.
Oxides of carbon.
Conditions to avoid
Avoid exposure to frost.
Incompatible materials
Incompatible with acids , alkalis and oxidising agents .
11. TOXICOLOGICAL INFORMATION
Acute effects
No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs.
Eye contact
May be an eye irritant.
Skin contact
Contact with skin may result in irritation.
Ingestion
No adverse effects expected, however, large amounts may cause nausea and vomiting.
Inhalation
Where this material is used in a poorly ventilated area, at elevated temperatures or in confined spaces, vapour may cause irritation to mucous membranes of the respiratory tract, headache and nausea.
Toxicity and irritation
Silver Powder.
330 mg/kg (rat, multiple methods of administration)
330 mg/kg (rat, multiple methods of administration)
12. ECOLOGICAL INFORMATION
Ecotoxicity
Avoid contaminating waterway.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
No further relevant information available.
13. DISPOSAL CONSIDERATIONS
General information
Refer to Waste Management Authority. Dispose of material through a licensed waste contractor. Normally suitable for
disposal at approved land waste site.
disposal at approved land waste site.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Not combustible, however following evaporation of the water component of the material, the residual material can burn if ignited. On burning will emit toxic fumes, including those of oxides of carbon.
UN Number
None
Proper shipping name
Not regulated.
Transport hazard class
Void
Packing group
None.
Environmental hazard
No information available.
Special precautions for users
No information available.
Additional information
No information available.
15. REGULATORY INFORMATION
Poisons Schedule Number
None allocated.
Other Information
No further relevant information available.
16. OTHER INFORMATION
SDS preparation date
12 March 2018
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.