SAFETY DATA SHEET
DMP
1. IDENTIFICATION
Product Identifiers
Product Name:
DMP
Other Names:
2,2-Dimethoxypropane , acetone-dimethyl acetate
Product Number(s):
C052
CAS Number:
77-76-9
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS02 flame
H225 Highly flammable liquid and vapour.
GHS07 Eye Irrit. 2
H319 Causes serious eye irritation.
H225 Highly flammable liquid and vapour.
GHS07 Eye Irrit. 2
H319 Causes serious eye irritation.
Label Elements
Signal Words
Danger
Hazard Statement(s)
Highly flammable liquid and vapour.
Causes serious eye irritation.
Causes serious eye irritation.
Precautionary Statement(s)
Keep away from heat/sparks/open flames/hot surfaces. No smoking.
Use explosion-proof electrical/ventilating/lighting equipment.
Wear protective gloves / eye protection / face protection.
Ground/bond container and receiving equipment.
Keep container tightly closed.
Use only non-sparking tools.
Take precautionary measures against static discharge. Wash thoroughly after handling.
Use explosion-proof electrical/ventilating/lighting equipment.
Wear protective gloves / eye protection / face protection.
Ground/bond container and receiving equipment.
Keep container tightly closed.
Use only non-sparking tools.
Take precautionary measures against static discharge. Wash thoroughly after handling.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Not available.
Ingestion:
Not available.
Eyes:
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
Skin:
(or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Environment
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
acetone-dimethyl acetate
77-76-9
-
-
4. FIRST AID MEASURES
Ingestion
If symptoms persist consult doctor.
Inhalation
Supply fresh air; consult doctor in case of complaints.
Skin Contact
Generally the product does not irritate the skin.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
No further relevant information available.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
In case of fire: Use for extinction: CO₂, powder or water spray.
CO₂, sand, extinguishing powder. Do not use water.
CO₂, sand, extinguishing powder. Do not use water.
HAZCHEM
Not available.
Special protective equipment and precautions for fire fighters
No special measures required.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Environmental precautions
No special measures required.
Methods and materials for containment and clean up
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents.
Do not flush with water or aqueous cleansing agents.
7. HANDLING AND STORAGE
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace
Conditions for safe storage
Protect against electrostatic charges
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Engineering controls
Store in a well-ventilated place. Keep cool.
Personal protective equipment
Eye and face protection
Tightly sealed goggles.
Skin protection
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Respiratory protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Colourless liquid
Odour
Characteristic
pH
Not determined.
Vapour Pressure
at 26 °C: 33 hPa
Density
at 20 °C: 0.85 g/cm³
Boiling Point
83 °C
Melting Point
Undetermined.
Solubility
Miscibility with water at 20 °C: 180 g/l
Specific Gravity of Density
Not determined.
Flash Point
-10 °C
Flammable (Explosive) Limits
Not determined.
Ignition Temperature
Not determined.
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous decomposition products known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. TOXICOLOGICAL INFORMATION
Acute effects
No further relevant information available.
Eye contact
Irritating effect.
Skin contact
No irritant effect.
Ingestion
No further relevant information available.
Inhalation
No sensitising effects known.
Toxicity and irritation
No further relevant information available.
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Generally not hazardous for water.
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulation.s
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulation.s
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Not available.
UN Number
UN1993
Proper shipping name
1993 FLAMMABLE LIQUID, N.O.S. ((DMP), 2,2- Dimethoxypropane)
Transport hazard class
3 F
Packing group
II
Environmental hazard
No information available.
Special precautions for users
Warning: Flammable liquids.
Danger code (Kemler): 33
EMS Number: F-E,S-E
Danger code (Kemler): 33
EMS Number: F-E,S-E
Additional information
ADG
Limited quantities (LQ) 1L ·
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 mL Maximum net quantity per outer packaging: 500 mL · Transport category 2 ·
Tunnel restriction code D/E ·
IMDG ·
Limited quantities (LQ) 1L ·
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 mL Maximum net quantity per outer packaging: 500 ml
Limited quantities (LQ) 1L ·
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 mL Maximum net quantity per outer packaging: 500 mL · Transport category 2 ·
Tunnel restriction code D/E ·
IMDG ·
Limited quantities (LQ) 1L ·
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 mL Maximum net quantity per outer packaging: 500 ml
15. REGULATORY INFORMATION
Poisons Schedule Number
Substance is not listed.
Other Information
EC number: 201-056-0
16. OTHER INFORMATION
SDS preparation date
6 October 2021
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.